3 Reasons to Use TIG Welding
If your business has a range of welding needs, then you need to find a cost-effective solution that covers as many jobs as possible. You don't necessarily want to buy lots of kits for different processes. Ideally, you want to use one process that works on as many of your jobs as possible. For example, TIG welding might give you more flexibility.
Why should you consider investing in a TIG welding system?
1. Weld a Wider Variety of Materials
Some welding systems work well on some metals but not on others. Most can handle working on steels and some alloys but aren't suitable for other materials. If you use TIG welding, then you can work on basic and less common metals. For example, you can use this process to weld metals as diverse as copper, brass and bronze as well as standard steels and alloys.
So, if you need to weld different materials, then a TIG system might be the best solution. You get more of a one-size-fits-all kit.
2. Improve Your Weld Quality
While you might not always need your welds to look good, there are times when cosmetics matter. You might need a repair to look clean and even; you don't want to leave splatter or spark marks on the metal when the job is done. While some welding methods can't always create a professional and clean finish, you'll see better results if you use TIG welding. Your welds won't be impaired by splatter or slag residues.
Plus, a TIG welder gives you better control as you work. If you buy a system that gives you foot or finger heat controls, then you can control the heat of the weld puddle a lot more precisely. So, you can heat the puddle up or cool it down rapidly. This helps prevent the metal from overheating, scorching or burning. You get a more effective weld that looks good.
3. Get Better Out-Of-Position Results
Sometimes, you need to make welds in unusual positions. You can't always work on the material horizontally; sometimes you must work vertically, downwards or to the side. Not all techniques work on these out-of-position welds. Their torches might need to point down to work. Or, their lack of heat control might allow the puddle to fall or slide out of the weld.
A TIG welder works better in different positions and directions. Its more precise controls help you successfully weld in even if gravity is working against you. To learn more, contact welding suppliers.